Bicycle Pump: Best Bike Pumps - Reviews and Guide 2017

Review Topeak Road Morph G Bicycle Pump

Morph™ technology packs bike pump efficiency and ease of use into a compact, portable design you can bring along for the ride.

bicycle pump 8The really cool feature of this pump is that several portions are movable (morph-able), making it more convenient for emergency pumping on-the-go. The handle, which is held in place by turning the handle until it clicks into the barrel, pivots 90 degrees, allowing the user to use his/her body weight to pump when the pump is held against the floor. This is advantageous because it allows more force to be generated, less arm strength be used, and less energy be expended by the user when pumping tires. The foot pedal pivots 90 degrees from the base, allowing the user to hold the pump in place using his/her foot while pumping. After unhooking the head of the hose from the hook, the head can actually be pulled out, exposing about ~3 inches more of rubber hose, allowing the user better reach the valves on the tires. The pump head adapters can also fit both Schrader and Presta valves by flipping the two rubber/plastic adapters.

bicycle pump 9This  bicycle pump is very useful and it’s portable. Topeak Road Morph G attaches to the bike frame with the supplied flexible mounting. You can screw on the mounting, if your bike frame has that capability – or you can  mount it using the supplied other mounting hardware.

Also nice at this bike pump is the fold out foot rest and extension tube, which make for an easy pumping action. And of course, the handy little pressure gauge.
The key feature of this pump is that the pump head is connected to the main pump by a short section of rubber tubing. This lets you put the end of the pump on the ground after locking the head onto the tube valve. Then, you can use your body weight to do the pumping as with a floor pump, which is very nice. A short, plastic foot swings down so you can use your foot to keep the bottom end of the pump from slipping as you pump.

Product Features

  • Portable on-the-go bike pump with padded T-handle
  • Foldout footpad stabilizes the pump against the ground
  • Flexible air hose works with awkward or tight valve placements
  • Extra-long barrel; inline gauge and secure mounting bracket
  • Presta/Schrader head with plastic thumb lock; weighs 0.49 pounds

Morph technology in a road pump. Extra long barrel gives huge performance. Includes in-line gauge.

Head

Presta/ Schrader/ Dunlop Valves

Barrel

Butted Aluminum

Gauge

In-line Gauge, Reads 140 psi/9.6 bar

Thumb Lock

Plastic

Handle

T-Type Plastic/Kraton

Capacity

160 psi / 11 bar

Added Features

Fold-out Foot Pad
Flexible Hose
Centerline Mount Bracket

Size (L x W x H)

35 x 5.7 x 2.8 cm
13.8” x 2.2” x 1.1”

Weight

220 g / 7.74 oz ( w/ gague)

 

Review Lezyne Road Drive Bicycle Pump

Lezyne Road Drive Pump is THE pump to get if you ride a road bike. This Lezyne high pressure bicycle hand pump is very light, quick to set up and delivers air efficiently for its small size.

bicycle pump 16Like the majority of Lezyne products the Road Drive Pump is a high-quality bike pump, made entirely of aluminum for precise and lightweight construction. With it’s size of 283 mm for the large version and 216 mm for the medium version, Road Drive Pump is not really a mini pump, but it’s also to small for a frame pump, although it comes with it’s own alloy bottle-cage mounting bracket. This pump fits inside the seat post itself, and is held in place with some adhesive based hook and loop fastner (very easy to install).

The flexible hose that connects the pump to the Schrader/Presta valve is reason enough to buy this pump. You will be amazed at how little effort you can get the tires to be rock hard. While this isn’t as speedy as CO2 inflator, you will prefer it since it’s reusable. The ABS switch is wonderful. ONE simple press removes the pressure from the pump and hose, allowing you to easily screw the hose off of the valve without worrying about either ripping the valve core out or losing any of your hard-earned air. The barrel, handle, piston, end caps and pump mount are all custom CNC machined. Both ends of the CNC-ed aluminium pump are protected by rubber caps to stop road gunk getting inside and the connecting hose screws securely inside the handle.

The pumping itself is not difficult. It’s almost as easy as a floor pump. You will get get a 700x23c tire up to 110 Psi in 150 strokes. 50 more will get you up to 120 Psi.

If you’re going to frame-mount the pump, than chose the size Large- it’s still not that long. If you stuff your pump in a pocket then consider the shorter version. With 20% more inflation power than a typical bicycle pump, this Lezyne pump is the ultimate hand pump when weight and performance matter.

If you ride a road bike and a pump is your primary means of inflation, get one of these!

Review RockShox High-Pressure Shock Pump

This RockShox High-Pressure Shock Pump (300 psi max) works perfectly, as it has an elongated tip, which is helpful if your valve is slightly receded (even after turning all the way the shock height adjustment ring, which surrounds the valve). It is easy to attach and use, and gives consistent pressure readings.

bicycle pump 20This bicycle pump connects easily, the gauge is very accurate and easily to read. Keeps the pressure up while you are removing it from the shock. There’s virtually no leakage on disconnect.
This is a quality made shock bicycle pump easily delivers the high PSIs needed to tune certain forks and has a very durably constructed.

Product Features:

• Durably constructed
• Easy to attach and use
• Very accurate gauge

Anybody with a full suspension bike requiring a high pressure bike tire pump for the rear should buy this immediately. You get so much more from the suspension when you have the tools to tune it. Highly recommended.

Bicycle Pump – CO2 Bike Pump

What can be more annoying than getting a flat tire several miles into your ride? and having to inflate your new or repaired tire with a bicycle pump… Instead, you can use a CO2 bike pump to inflate your bike tire in seconds.

A CO2 inflator is a rapid and compact solution to inflating your tires, ideal for races or in critical situations, when you need to get back on your bike as soon as possible. Co2 bike pumps fit in your backpack, pocket or you can mount the CO2 inflator to the frame earning essential space for plenty of other ride necessities.

Lezyne Alloy Drive CO2 Inflator is a 100% CNC machined aluminum CO2 inflator with an integrated cartridge storage canister for safely storing a CO2 cartridge. The canister body also insulates from cold during inflation. The Trigger Valve Operation allows for easy and precise controlled inflation. The Twin Chuck head threads directly onto Presta and Schrader valves for secure valve engagement. This inflator is compatible with all CO2 cartidges, threaded and unthreaded.

bicycle pump 21You can either buy a frame pump that attaches to your bicycle, a mini pump that fits in your backpack or a floor pump that stays at home. But it is never too much to get extra safety…so buy this beautiful and fairly light CO2 inflator and put it in your backpack… you’ll be back riding in minutes.

Product Features:

• Accepts all CO2 cartidges, threaded and unthreaded
• Lathed and high-speed CNC finished aluminum cartridge canister
• CNC machined 7075 aluminum body and hardened stainless steel puncture-pin
• Lezyne Smart-Thread assembly threads directly to Presta or Schrader valves
• Triggered operation for precise inflation

Review Topeak RaceRocket Master Bicycle Pump

This stylish and sleek mini pump is designed to meet the demands of a professional racing and training schedule.

bicycle pump 23This bike tire pump features a full aluminum body, head and pump handle. An extendable hose helps take stress off the valve stem and the dependable single action stroke fills tires fast. The RaceRockets compact size easily fits in a pocket and its low weight is welcome on long training rides and endurance races.

bicycle pump 24Topeak RaceRocket Master Blaster Bicycle Pump has a excellent build quality and it is also very easy to use: you just have to flip the cap and unscrew the hose to extend. The switch between Schrader (default) and Presta valves is also very simple and practical. It has a short hose with an end that screws onto Shrader or Presta valve stems. It weighs 85 grams which is lighter than the CO2 inflator and one cartridge. This pump can be mounted easily under your water bottle and it is compact enough not to hinder your riding.

Advantages:

• Neat design
• Works well for its intended use
• Small, attractive design
• One head for Presta and Schrader valves (no flipping internal parts)
• Comfortable handle
• Frame mount is included
• Reasonable, fair price

Excellent quality, light weight, easy to use…you can find all of this in Topeak RaceRocket Master Blaster Bicycle Pump.

Product Features:

Color: Black/Silver
• Head SmartHead ThreadLock w/ Integrated Dust Cap
• Barrel CNC Aluminum
• Capacity 140 psi / 9.6 bar
• Size (L x W x H) 18 x 3.6 x 2.5 cm / 7.1? x 1.4? x 1?
• Weight 85 g / 2.99 oz

Watch here a great presentation of the Race Rocket MT. Enjoy!

Page 3 of 7