Best CO2 Inflator for Mountain Bike
Table of Contents
- Top Rated CO2 Inflators for Mountain Bike
- The Benefits of CO2 Inflators
- What You Should Know Before Buying a CO2 Inflator
- CO2 Inflator Pro’s and Con’s
- Who Should Use CO2 Inflators?
- Valve Compatibility of CO2 Bike Pumps
- How to Inflate a Tire with a CO2 Inflator
- Buy the Best CO2 Bike Pumps Online
Sooner or later, every cyclist will suffer an undesirable puncture. In such a situation, which is the best way to inflate back the tire, a CO2 cartridge or a bike pump? Fast riders prefer CO2 inflators when it comes to fixing a flat tire. This is definitely a quicker solution and it takes less effort to pump up a tire at the desired pressure. So, if you are asking yorself “What kind of CO2 Inflators for Mountain Bikes are people using?” we reviewed four CO2 cartridges inflators for road bikes and mountain bikes to help you decide which to go for.
The products mentioned in this article are selected and reviewed independently by our editors. However, when you buy something through the links on our site, we may earn an affiliate commission (at no additional cost to you), but this never influences our opinion.
Top Rated CO2 Inflators for Mountain Bike
CO2 Inflator by Pro Bike Tool
If you are a cycling enthusiast, you appreciate how frustrating a flat tire emergency can be. Just when you are enjoying the ride of your life, a flat tire happens and sucks all the fun out of this experience. A few years back, you would have needed to carry along a mini-pump which is bulky and inconveniencing for such emergencies. Luckily, C02 inflators which are lightweight and faster to use are now readily available.
If you are in the market shopping for a reliable C02 inflator, then you have to try out the incredible CO2 Inflator by Pro Bike Tool. This is one of the top selling products in its category on all marketplaces and for many good reasons. For cyclists who don’t want to be hampered by a frustrating flat tire, this is a handy tool which is highly recommended for its quick-tire inflation and a simple one-handed operation.
Whether you are a professional rider or you are just out for a fun riding experience, you want to get the most out of your ride and this is why fast-inflation is a must. With its 1-Turn Valve System, the CO2 Inflator by Pro Bike Tool delivers fast inflation in seconds and you will be back on the road in no time. The innovative control lever operation guarantees safety by regulating air flow which not only protects the user but also the tires by helping you control the air flow.
The twin valve head tightly threads into both Presta and Schrader valves and as a cyclist you appreciate how convenient this is for your ride. There is no tedious valve head switching required which not only saves time but also energy and money. This compatibility with the most common valves is a feature not found in many C02 inflators. It is one of the most outstanding qualities cited by customer in their testimonials.
The reason mini pumps are going out of fashion is due to their weight. As a rider, you don’t want anything bogging you down while enjoying your ride. This inflator is small, compact and lightweight and is easily stored in your saddle bag. You won’t even realize you have it until you need it.
To guarantee efficiency when using this product, the inflator head is designed for use with all sizes of threaded CO2 cartridges including 12g, 16g, 20g & 25g. This reduces the likelihood of a leak which is a big letdown with most inflators in the market. The superior quality CNC machined aluminum alloy used to construct this inflator makes it more durable than most products in the same category. It is built to last and saves you money in the long run.
The makers of CO2 Inflator by Pro Bike Tool back this product with an amazing warranty which entails a refund or a replacement if there is any issue with the CO2 inflator.
While this CO2 inflator does not come with CO2 cartridges in its package, the advantages for the biker are just immense. It is a durable, flexible, efficient, lightweight, easy to use and fast which is exactly what a rider wants.
Portland Design Works Shiny Object CO2 Inflator with Leather Sleeve and Cartridge
Biking is now cool and more people are picking up this as a form of exercise. The prominence of cycling as a sport across the globe has also made more people appreciate how effective this can be for a healthy lifestyle. Still, others cyclists do it just for fun as it accords them a chance to see the world uninhibited.
However, all this is not possible when your bike suffers a flat tire. This is the most frustrating thing to happen to a biking enthusiast and it dampens the otherwise exciting experience. This is where a versatile C02 inflator comes in handy. Forget the mini pumps that are heavier and instead consider the convenience that comes with a compact and lightweight C02 inflator.
There are many inflators in the market but the eye-catching and functional Portland Design Works Shiny Object CO2 Inflator with Leather Sleeve and Cartridge stands out for many good reasons. The inflator features a 16 gram CO2 cartridge and a magnificent retro-styled stitched leather sleeve which not only adds a dash of aesthetics but also protects your hands and minimizes noise when riding. It is one of the most recommended products in this category with most customers giving it the highest rating.
Unlike most CO2 inflators in the market, this bike tire inflator is compatible with both Presta and Schrader valves. This saves the rider a lot of tinkling when switching valves. It is an easy to use inflator which is exactly what a cyclist needs.
There is a Control Knob for CO2 Release which allows regulated air flow. This allows the user to fill tires up to the desired pressure setting. This not only protects the tires but also guarantees a more comfortable ride. There are no leaks and you will find it easier to reach the suggested PSI settings quickly.
At a mere 80 grams, this is one of the lightest CO2 inflators in the market which is a big plus for riders. As a rider, you appreciate the need for minimal weight on your bike and this is why a lightweight CO2 inflator comes in handy. You can easily fit it into your saddle bag and reach for it only when necessary.
The Shiny Object CO2 Inflator with Leather Sleeve and Cartridge by Portland Design Works also boasts indestructible alloy construction and you are assured the product is built to last. You don’t have to worry about
costs of replacement or repairs. This is one reason the manufacturer backs the products with a lifetime warranty against defects. This shows their confidence in the product they are offering to the market. The Sleeve leather is not only stylish but also durable; it is vegetable tanned for strength and dyed with natural oils and waxes for durability.
This CO2 inflator comes with a single cartridge sold separately and is compatible only with 16-gm CO2 cartridge. Despite these limitations, this remains a must-have for cyclists who want to get the best out of their rides. It a small, light-weight bike inflator which boasts durable alloy construction and has a stylish and outstanding exterior.
Lezyne Alloy Drive CO2 Inflator
What can be more annoying than getting a flat tire several miles into your ride? and having to inflate your new or repaired tire with a bicycle pump… Instead, you can use a CO2 bike pump to inflate your bike tire in seconds.
A CO2 inflator is a rapid and compact solution to inflating your tires, ideal for races or in critical situations, when you need to get back on your bike as soon as possible. Co2 bike pumps fit in your backpack, pocket or you can mount the CO2 inflator to the frame earning essential space for plenty of other ride necessities.
Lezyne Alloy Drive CO2 Inflator is a 100% CNC machined aluminum CO2 inflator with an integrated cartridge storage canister for safely storing a CO2 cartridge. The canister body also insulates from cold during inflation. The Trigger Valve Operation allows for easy and precise controlled inflation. The Twin Chuck head threads directly onto Presta and Schrader valves for secure valve engagement. This inflator is compatible with all CO2 cartidges, threaded and unthreaded.
You can either buy a frame pump that attaches to your bicycle, a mini pump that fits in your backpack or a floor pump that stays at home. But it is never too much to get extra safety…so buy this beautiful and fairly light CO2 inflator and put it in your backpack… you’ll be back riding in minutes.Check Latest Price at Amazon
Genuine Innovations G2628 Ultraflate Plus Tire Inflator
First, a bit of advice: always carry a bicycle tire pump in addition to your CO2 inflator. The CO2 inflator is really ideal for when hand pumping starts to get difficult as pressure builds in the tire, but not by itself. Your ride, your comfort, and your endurance will all be far better if you’re better equipped.
You will need the hand pump to start out the tube, and should use it to quickly do a pumping until it starts to get hard to move the pump, THEN use the CO2 inflator for the hard part. By using the hand pump first, you can inflate the tire fully using only one cartridge instead of two or three.
A road tire will pump up to 100 psi on one cartridge, one shot, on a warm day. On a cold day, below 40F, the cartridge pump could be almost useless. Know also that this pump is compatible with every kind of cartridge except 12 gram threadless, which are hard to find except for the air rifle cartridges that contain silicon. But they work best with 16 gram threadless, so you can use handle and all.
The locking switch is a great improvement over an old CO2 inflator, which didn’t have this feature, so that you can still use that bit of air that may be left in a partially used cartridge. You have to be careful with this type of inflator. You can easily over fill your tubes! This isn’t the product’s fault, it’s the user. Give it a quick one or two bursts with the trigger and check the pressure before you inflate it any more. This inflator will take both threaded and non-threaded CO2 cartridges. If you use threaded cartridges you do not need the lower portion of the inflator which means you can pack even lighter.
The Innovations Ultraflate Plus Tire Inflater is a great bicycle pump that has a durable build and fits most CO2 cartridges. It is easy to use with built in safety feature and trigger inflation. Works with ALL Genuine Innovations CO2 refill cartridges (except 45 gram).
The advantage of the Ultraflate Plus Tire Inflater is that it will accept either threaded or non-threaded CO2 cartridges. And that is a big advantage if you’re on a ride with some others and you realize you don’t have a full cartridge with you and everyone else has nothing but non-threaded cartridges with them. Works with Schrader valves as well as Presta, but you must be careful with road bikes because it takes less than one cartridge to fill up a 700cc tube. It’s lightweight and small, so it won’t take up much room in your bike tool bag. It comes with one 16 gram CO2 cartridge.
Replacements can also be obtained from most any local bike shop. Fortunately for those on a budget, the 12 gram CO2 cartridges that you can buy from the sporting goods department also work. The 16 gram CO2 cartridges can be a bit pricier, so you can save yourself some $$$ by buying the much less expensive 12 gram CO2 cartridges. If you don’t use up a full cartridge, there is a locking mechanism that prevents the release trigger from being depressed when stowed. This tool is highly suggested, if you don’t have a pump and are short on space (like most road bikes). This thing fits nicely inside a mini bag under the seat along with the multi tool and spare tube and patch kit. Works great and super easy. This product is a super handy novelty, which should be attached to your bike somewhere…
With this inflator, you can use the 12 gram non-threaded Co2 canisters from just about any manufacturer. This inflator is very robust – not cheaply made at all. The trigger mechanism to release the Co2 into the tire is very convenient. You control the flow, fast or slow.
This CO2 inflator comes with one 16g non-threaded CO2 cartridge. Fast fill, just put a go! You never stop cycling for flat tire. Is easy to use and it is priceless when you can go many miles without worries to stop and end your trip because have a flat tire.
The item itself seems very well made and it is in a pretty compact package. You’ll be glad to have this little emergency pump!Check Latest Price at Amazon
The Benefits of CO2 Inflators
Single-use compressed air CO2 (carbon dioxide) cartridge pumps can quickly inflate tires.
Different sizes of cartridges are available, with most cartridge pumps being able to use more than one size. Depending on the following, one or two cartridges may be needed to fully inflate a completely flat tire:
- Size of the tire.
- Size of the cartridge.
- Recommended tire pressure.
To save on cartridges, a hand bike pump can be used for the easy initial inflation. Cartridges are then used to top up the pressure, when hand-pumping becomes too difficult.
What You Should Know Before Buying a CO2 Inflator
From a variety of bike pumps available on the market, you will come across an advanced device, known as CO2 Inflator or CO2 Bike Pump. Being the most advanced bike pump model, this type is utilized by professionals and serious racers. Before knowing more about CO2 pumps, let’s have a look at what a bicycle tire pump is and how it works?
A bike pump usually comprises of the following components:
- Pressure Gauge (some types do not incorporate pressure gauge)
- Valve (Presta/Schrader)
Using compressed air, a bicycle pump is able to inflate the tires with the correct pressure. As the cylinder is compressed, the air is pushed down the tube through a valve. The pressure in the air forces the valve to open instantly and when the handle is pulled up, the valve shuts off automatically so that air cannot escape from the tire.
The CO2 bike pumps are designed to be the fastest way to inflate tires with the correct pressure. These pumps use replaceable CO2 cartridges, which make the entire process very fast. There is a lever on a cartridge that is broken and the air is pushed into the tire valve quickly.
Since these pumps contain carbon dioxide, the tires will go flat within a few days, because the CO2 molecules leak easily than air. This is the reason why you need to have CO2 cartridges with you… so that you can pump up the flat tires instantly. You can also find inflators, that feature a pressure gauge on the top side, in order to display the correct tire pressure.
CO2 Inflator Pro’s and Con’s
Who Should Use CO2 Inflators?
The CO2 bike pumps are suitable for the following users:
- Professional racers and cyclists
- Semi – professionals
- Users who need to inflate tires quickly
Valve Compatibility of CO2 Bike Pumps
Being a major component, a valve needs to be considered first before buying a Co2 inflator. There are mainly two types of valves:
1. Schrader Valves
2. Presta Valves
Schrader is the type that is usually found in ordinary models of bikes (like mountain or kids bikes), while the Presta valve can be found on high-quality racing bikes. If you buy CO2 inflators, you will benefit from the advantage that they are usually equipped with both Presta and Schrader valve connections.
How to Inflate a Tire with a CO2 Inflator
A CO2 is a compact, lightweight and portable alternative to bike pumps but is a one-off solution. There’s a nozzle/inflator and a cartridge holding the CO2. Steps to use your CO2 tire inflator are:
1. Release remaining air out of a bad tube. Check for puncture and repair it.
2. Connect the inflator’s valve head into the Presta or Schrader valve.
3. Once you are sure the connection is tight, screw the cartridge to the inflator.
4. Inflate the tire and if need be add another cartridge if you are using a high pressure tire.
5. Check tire clean lines for bumps and correct them.
Buy the Best CO2 Bike Pumps Online
While searching for the fastest bike pump to inflate your tires very quick, CO2 inflators come as the top best buy solution. Being the fastest way to inflate tires, these devices are widely used by professional cyclists and racers. In order to buy a high-quality CO2 bike pump, Amazon is undoubtedly a great place to shop from.
The platform embodies a number of products in this category as well as related accessories. The budget required to buy an efficient CO2 bike pump is just in the range of $10-$30. This is definitely an affordable price range that will let you enjoy economical and durable pumping solutions.